Abstract

SCHILARDI SICOLI, Carlos E.; ALIOD, Ricardo; ZORILLA, Fernando  and  MORABITO, José Antonio. Optimal design of drip irrigation submains: presure-compensating emitters. Rev. Fac. Cienc. Agrar., Univ. Nac. Cuyo [online]. 2019, vol.51, n.2, pp.154-166. ISSN 1853-8665.

For a drip irrigation system to be successful, it must be well designed, properly installed, managed and maintained. In plots with steep slopes and irregular topography that have little land leveling capacity and/or that require very efficient agricultural machinery, drip irrigation designs generally use pressure-compensating emitters. This work develops a methodology and implements it in a computer tool that makes it possible to optimally determine in drip-irrigated plots with pressure-compensating emitters: a) telescopic sizing of the submain manifold pipe, b) supply valve pressure and c) subunit’s intake valve location, when considering all hydraulic-economic aspects in the design phase. Techniques of optimal sizing of pipe networks and simulation of hydraulic networks under pressure are linked to economic analyzes of total annualized costs. Finally, the practical usefulness of the proposed methodology is shown with three examples of complex real cases where pipe design costs are reduced by 16-34% and energy costs by 37-51%.

Keywords : Drip irrigation; Design; Submain; Pressure-compensating emitters.

        · abstract in Spanish     · text in English     · English ( pdf )