SciELO - Scientific Electronic Library Online

 
vol.22 número1Influence of desensitizing agents on the microshear bond strength of adhesive systems to dentinIn vitro analysis of bond strength of self-etching adhesives applied on superficial and deep dentin índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Acta Odontológica Latinoamericana

versão On-line ISSN 1852-4834

Resumo

ORELLANA, Noé et al. Comparative study of the microtensile bond strength of three different total etch adhesives with different solvents to wet and dry dentin. (in vitro test). Acta odontol. latinoam. [online]. 2009, vol.22, n.1, pp.47-56. ISSN 1852-4834.

The aim of this study was to compare the microtensile bond strength of three different total etch adhesives: XP Bond (Caulk- Dentsply) versus Excite (Ivoclar/Vivadent) and Prime & Bond NT (Caulk-Dentsply). Forty two (42) third human molars were cut to expose the dentinal surface. They were divided into three groups of 14 teeth (G1: XP Bond, G2: Excite, G3: Prime & Bond NT) and two groups of seven teeth for each moisture condition: moist dentin (GM) and dry dentin, (GD). The total-etch technique was used with each moisture variation. The adhesives and composites A3 (Ceram Duo G1, G3 and Tetric Ceram G2) were applied according to manufacturer’s instructions. Teeth were cut with an ISOMET 1000 (Buehler Ltd.) to obtain 1 mm 2 x 10 mm bars, which were subject to a traction test at 5 mm/min in a universal testing machine (Adamel Lhomargy DY 36). The collected data were recorded and analyzed using an experimental design for studying two factors of fixed effects with software Statgraphics version 5.1. For the variable type of adhesive, we found p=0.000; for the variable substrate condition, p=0.0012, and for interaction between both factors, p= 0.0457, which indicates significant statistical differences. The values for microtensile bond strength were G1M= 55.0642 MPa Standard deviation (SD) 3.09768; G1D= 39.115 MPa SD 2.86789; G2M= 34.1607 MPa SD 2.86789; G2D= 32.7373 MPa SD 2.77065; G3M= 37.3407 MPa SD 2.86789 and G3D= 31.0593 MPa SD 2.77065. XP Bond showed the greatest values of microtensile bond strength under both conditions. Moist substrate increases the values of microtensile bond strength for the adhesives tested; however, Excite shows lower susceptibility to variation of dentinal moisture.

Palavras-chave : Tensile strength; Adhesives; Dentin bonding agents; Solvents; Ethanol; Acetone; Tert-butyl alcohol.

        · resumo em Espanhol     · texto em Inglês

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons