SciELO - Scientific Electronic Library Online

vol.35 número2Sampled-data minimum variance filteringDiscrete event control of time-varying plants índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados



  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO


Latin American applied research

versión impresa ISSN 0327-0793


SONNAILLON, M. O. et al. Digital communication interface for an automotive application. Lat. Am. appl. res. [online]. 2005, vol.35, n.2, pp. 129-133. ISSN 0327-0793.

This paper presents the design and implementation of a digital communication interface between a Motor Drive Controller (MDC) and a digital network supervisor. This work is part of the DOE/CARAT project "Integrated Controllers for Automotive Auxiliary Electric Motors", being performed between the University of Arkansas and at GEA (Applied Electronics Group), National University of Rio Cuarto. The Controller Area Network (CAN) is the digital communication protocol of choice for automotive applications. The MDC was implemented using a Digital Signal Processor (DSP) and the network supervisor using a standard personal computer (PC) with a CAN communication board.

Palabras clave : CAN Communication Protocol; Motor Drive Controller; Automotive Applications.

        · texto en Inglés     · Inglés ( pdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License