SciELO - Scientific Electronic Library Online

vol.36 número3Modeling of Fischer-Tropsch synthesis in a tubular reactorModeling of methane steam reforming in a palladium membrane reactor índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados




  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO


Latin American applied research

versión impresa ISSN 0327-0793


AZNAR, A. C.  y  AMALVY, J. I.. Manufacture and testing of water-borne paints by using vinyl latex containing VeoVa10® monomer. Lat. Am. appl. res. [online]. 2006, vol.36, n.3, pp.149-154. ISSN 0327-0793.

Two different water-borne dispersions (latex) containing different amounts of vinyl acetate and a commercial vinyl ester monomer (VeoVa10) were evaluated by incorporating them in paint formulations for wall protection. Three paint formulations were prepared with different PVC values. The main properties such as hiding power, washability, tension of adhesion, and elasticity were assessed. Changes in color, gloss and adhesion and the extension of chalking, checking, cracking and blistering were also evaluated in normal and accelerated weathering tests. The results indicate that both dispersions are suitable for wall protection (interior or exterior, permanent or temporary protection) and they are compatible with the most common additives used in the Argentinean and Mercosur markets. The presence of VeoVa10 in the binder composition improves the water and UV resistances of the paint. A styrenic-acrylic latex, commonly used in the local market, was used as comparative product.

Palabras clave : Water-Borne Paints; Vinyl Binders VeoVa10® Latex; Wall Protection.

        · texto en Inglés     · Inglés ( pdf )


Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons