SciELO - Scientific Electronic Library Online

 
vol.38 número2A quasi-coulomb model for frictional contact interfaces: Application to metal forming simulationsA review on fault diagnosis of induction machines índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Latin American applied research

versión impresa ISSN 0327-0793

Resumen

FUENTES, G. et al. Composition influence on properties of acrylic composites loaded with synthetic hydroxyapatite. Lat. Am. appl. res. [online]. 2008, vol.38, n.2, pp.105-112. ISSN 0327-0793.

A study of composition influence over some properties of acrylic composites loaded with hydroxyapatite is presented. "Two pastes" method from dental obturants was used to prepare the composites. The working (2.5 < tw < 3.3 min) and setting (2.7 < ts < 3.7 min) times was in range reported for acrylic bone cements and enthalpy (around 40-60 kJ/mol) according to reports for acrylic materials. The absorption (110-240 µg/mm3) and solubility (10-130 µg/mm3) showed values higher than normalized ranges. Mechanical properties (compression strength and elastic modulus) showed a wide range result, including in some cases, better values than reported by other authors. The drug release from the composites was studied through Baker's treatment which justifies not only diffusion, but the migration and dissolution of drug in the phosphate buffer. The diffusion coefficients (10-10 cm2/s) and 15-20 % of drug release at 15 days support this result too.

Palabras clave : Composite; Copolymer; Hydroxyapatite Composite; Bone Regeneration; Brug Release.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons