SciELO - Scientific Electronic Library Online

 
vol.38 número2A quasi-coulomb model for frictional contact interfaces: Application to metal forming simulationsA review on fault diagnosis of induction machines índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Latin American applied research

versão impressa ISSN 0327-0793

Resumo

FUENTES, G. et al. Composition influence on properties of acrylic composites loaded with synthetic hydroxyapatite. Lat. Am. appl. res. [online]. 2008, vol.38, n.2, pp.105-112. ISSN 0327-0793.

A study of composition influence over some properties of acrylic composites loaded with hydroxyapatite is presented. "Two pastes" method from dental obturants was used to prepare the composites. The working (2.5 < tw < 3.3 min) and setting (2.7 < ts < 3.7 min) times was in range reported for acrylic bone cements and enthalpy (around 40-60 kJ/mol) according to reports for acrylic materials. The absorption (110-240 µg/mm3) and solubility (10-130 µg/mm3) showed values higher than normalized ranges. Mechanical properties (compression strength and elastic modulus) showed a wide range result, including in some cases, better values than reported by other authors. The drug release from the composites was studied through Baker's treatment which justifies not only diffusion, but the migration and dissolution of drug in the phosphate buffer. The diffusion coefficients (10-10 cm2/s) and 15-20 % of drug release at 15 days support this result too.

Palavras-chave : Composite; Copolymer; Hydroxyapatite Composite; Bone Regeneration; Brug Release.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons