SciELO - Scientific Electronic Library Online

 
vol.39 número1Aerodynamics of a fluidized bed of forestry biomass particles with mechanical agitationA wireless sensor network for endotracheal tube cuff pressure monitoring índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Latin American applied research

versão impressa ISSN 0327-0793

Resumo

TANDIOY, O.M.; GIL, I.D.  e  SANCHEZ, O.F.. Modeling of maleic anhydride production from a mixture of n-butane and butenes in fluidized bed reactor. Lat. Am. appl. res. [online]. 2009, vol.39, n.1, pp.19-26. ISSN 0327-0793.

The aim of this work was to model the catalytic oxidation of n-butane and butenes (Raffinate II) mixture to maleic anhydride (MAN) over a vanadium-phosphorus oxide (VPO) catalyst in a fluidized bed reactor (FBR). The three phase Kunni-Levenspiel hydrodynamic model (K-L) was used to describe the reactor. The obtained differential equations were solved by the fourth order Runge-Kutta numeric method. The K-L model was validated by a fitting comparison with reported experimental data for MAN production from n-butane. For the n-butane and Raffinate mixture, the maximum calculated MAN yield was about 52% over the FBR emulsion with a 49% of Raffinate conversion, and 51% of MAN selectivity. As a conclusion, the simulation program demonstrated a suitable performance to predict MAN selectivity, reactants conversion, and MAN and reactants concentration profiles.

Palavras-chave : Maleic Anhydride; Fluidized Bed Reactor; N-butane; Raffinate II.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons