SciELO - Scientific Electronic Library Online

 
vol.41 issue1The closing function in the waterhammer modelingEffectiveness factor calculation and monolith reactor simulation with non-uniform washcoat and arbitrary catalytic activity distribution author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Latin American applied research

Print version ISSN 0327-0793

Abstract

VIANNA JR, A.S. Characterizing a tubular polymerization reactor by washout initiator perturbation. Lat. Am. appl. res. [online]. 2011, vol.41, n.1, pp.49-55. ISSN 0327-0793.

The fluid dynamics of three styrene tubular polymerization reactors were analyzed theoretically and experimentally through washout perturbation. The analysis was developed through initiator negative step inputs and monomer conversion outputs, and thus additional analytic methods were not necessary as no tracer was used. The results were evaluated by an axial-dispersion model and a system of partial differential equations was obtained. This system was reduced by orthogonal collocation into a new system of differential algebraic equations, and these were numerically integrated over time by DASSL. The model parameter - Peclet number - and mean residence time were estimated by fitting the experimental data to the simulation. As these values were correlated, a maximum-likelihood procedure was carried out to estimate the values. Qualitative conclusions were obtained and different fluid dynamic patterns were observed.

Keywords : Fluid Dynamics; Dispersion; Modeling; Simulation.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License