Abstract

AGUIRRE, C.A; PAZ, R.R  and  BRIZUELA, A.B. Effects of mesh resolution on the simulation of severe thunderstorm: the need of parallel computing and distributed techniques. Lat. Am. appl. res. [online]. 2014, vol.44, n.1, pp.31-40. ISSN 0327-0793.

In the design of civil structures, it is necessary to consider the effect of the dynamic loads caused by changes in meteorological conditions such as wind speeds or ice deposits. In Argentina, the Standard of the Argentine Electrotechnical Association (AEA, 2006) is used to calculate structures of electrical transmission networks. This Standard specifies the value that must be assigned to the load by effect of the wind. This value is obtained from the meteorological records measured at conventional meteorological stations such as those of the National Meteorological Service. Nevertheless, to fit this parameter, it is also necessary to carry out local studies with updated information, considering the roughness and, in certain cases, the relief of the ground. Computational mechanics addresses this problem and is currently being used to estimate the values of maximum winds by simulations of severe meteorological events. However, it is also necessary to evaluate the results of this tool to know its accuracy in relation to the parameters of the numerical model. This work shows the use of the Large-eddy Simulation considering two options in the choice of element size used for a geographical grid domain in the thunderstorm occurred in Aranguren, Argentina, in 1998. In the first option, a processor is used to compute this event through a 406-meter grid-spacing in horizontal direction and in the second option a four-processor parallel method is used to obtain a more refined 200-meter grid-spacing. The last option allows simulating severe events such as down-burst or vortex occurrence with more details

Keywords : Severe Thunderstorm; Parallel Computing; Large-Eddy Simulation.