SciELO - Scientific Electronic Library Online

 
vol.44 número4Antioxidant capacity of Ilex paraguariensis extracts by using HRP-based biosensorEffects of heat source, chemical reaction, thermal diffusion and magnetic field on demixing of a binary fluid mixture flowing over a stretched surface índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Latin American applied research

versión impresa ISSN 0327-0793versión On-line ISSN 1851-8796

Resumen

DHARMALINGAM, S; MARIMUTHU, P  y  RAJA, K. Machinability study on al- 10% tic composites and optimum setting of drilling parameters in electrochemical micro machining using grey relational analysis. Lat. Am. appl. res. [online]. 2014, vol.44, n.4, pp.331-338. ISSN 0327-0793.

This paper investigates the influence of the process parameters like machining voltage, electrolyte concentration, frequency on the over cut and Material Removal Rate (MRR) on drilling of Al- 10% TiC Metal Matrix composites using Electrochemical Micro Machining (EMM) through taguchi methodology and grey relational analysis. Based on the analysis, optimum levels of parameters were determined and the same to validate through the confirmation test. Experimental results are in close agreement with the developed model. The confirmation results reveal that, there is considerable improvement in Material Removal Rate, Overcut. Grey relational grade are improved by 89.5 %, 57.9% and 95.16 % respectively. It is observed that the machining performance can be effectively improved with respect to initial parametric setting

Palabras clave : Metal Matrix Composite; Material Removal Rate; Overcut; Electrochemical Micromachining (EMM); Taguchi; ANOVA; Grey Relational Analysis.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons