SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Referencias del artículo

VIANNA JR, A.S. Characterizing a tubular polymerization reactor by washout initiator perturbation. Lat. Am. appl. res. [online]. 2011, vol.41, n.1, pp. 49-55. ISSN 0327-0793.


    1. Beuermann, S. and M. Buback, "Rate coefficients of free-radical polymerization deduced from pulsed laser experiments," Prog. Polym. Sci., 27, 191-254 (2002). [ Links ]


    2. Brandup, J., E. Immergut and E.A. Grulke, Polymer Handbook, 4th edition, Wiley, New York (1999). [ Links ]


    3. Brenan, K.E., S.L. Campbell and L.R. Petzold, Numerical Solution of Initial-Value Problems in Differential-Algebraic Equations, Elsevier (1989). [ Links ]


    4. Cabral, P.A., P.A. Melo Jr., E.C. Biscaia Jr., E.L. Lima and J.C. Pinto, "Free-radical solution polymerizations of styrene in a tubular reactor - effects of recycling," Polym. Chem. Eng., 43, 1163-1179 (2003). [ Links ]


    5. Chen, C.C. and E.B. Nauman, "Verification of a complex variable viscosity model for a tubular polymerization reactor," Chem. Eng. Sci., 44, 179-188 (1989). [ Links ]


    6. Covezzi, M. and G. Mei, "The multizone circulating reactor technology," Chem. Eng. Sci., 56, 4059-4067 (2001). [ Links ]


    7. Cutter, L.A. and T.D. Drexler, "Simulation of the kinetics of styrene," Computer Applications in Polymer Science, 13, 13-26 (1982). [ Links ]


    8. Danckwerts, P.V., "Continuous flow systems. Distribution of residence times," Chem. Eng. Sci., 2, 1-13 (1953). [ Links ]


    9. de Nardi, I.R., M. Zaiat and E. Foresti, "Influence of the tracer characteristics on hydrodynamic models of packed-bed bioreactors," Bioprocess and Biosystems Engineering, 21, 469-476 (1999). [ Links ]


    10. Finlayson, B.A., The Method of Weighted Residuals and Variational Principles, Academic Press, New York (1976). [ Links ]


    11. Giudici, R., C.A.O. Nascimento, I.C. Beiler and N. Scherbakoff, "Transient Experiments and Mathematical Modeling of an Industrial Twin-Screw Extruder Reactor for Nylon-6,6 Polymerization," Ind. Eng. Chem. Res., 36, 3513-3519 (1997). [ Links ]


    12. Hamer, J.W. and W.M. Ray, "Continuous tubular polymerization reactors - I. A detailed model," Chem. Eng. Sci., 41, 3083-3093 (1986a). [ Links ]


    13. Hamer, J.W., and W.M. Ray, "Continuous tubular polymerization reactors - II. Experimental studies of vinyl acetate polymerization," Chem. Eng. Sci., 41, 3095-3100 (1986b). [ Links ]


    14. Kiparissides, C., "Polymerization reactor modeling: a review of recent developments and future directions," Chem. Eng. Sci., 51, 1637-1659 (1996). [ Links ]


    15. Mayer, M.J.J., J. Meuldijk and D. Thoenes, "Application of the plug flow with axial dispersion model for continuous emulsion polymerization in pulsed packed column," Chem. Eng. Sci., 51, 3441-3448 (1995). [ Links ]


    16. Melo Jr., P.A., J.C., Pinto and E.C. Biscaia Jr., "Characterization of the time distribution in loop reactors," Chem. Eng. Sci., 56, 2703-2713 (2001a). [ Links ]


    17. Melo Jr., P.A., E.C. Biscaia Jr. and J.C. Pinto, "Thermal effects in loop reactors," Chem. Eng. Sci., 56, 6793-6800 (2001b). [ Links ]


    18. Nasution, U., W.M. van Gulik, A. Proell, W.A. van Winden and J.J. Heijnen, "Generating short-term kinetic responses of primary metabolism of Penicillium chrysogenum through glucose perturbation in the bioscope mini reactor," Met. Eng.8, 395-405 (2006). [ Links ]


    19. Olaj, O.F., M. Zoder and P. Vana, "Chain length dependent termination in pulsed-laser polymerization. 9. The influence of solvent on the rate coefficient of bimolecular termination in the polymerization of styrene," Macromolecules, 34, 441-446 (2001). [ Links ]


    20. Pinto, J.C. and H. Ray, "The Dynamic Behavior of Continuous Solution Polymerization Reactors IX. Effects of Inhibition," Chem. Eng. Sci., 51, 63-79 (1996). [ Links ]


    21. Santos, T.J. and J.C. Pinto, "Taking Variable Correlation into Consideration during Parameter Estimation, Brazilian Journal of Chemical Engineering," Braz. J. Chem. Eng., 15, 1 (1998). [ Links ]


    22. Sayer, C., M. Palma and R. Giudici, "A comparison of different modeling approaches for the simulation of the transient and steady-state behavior of continuous polymerizations in pulsed tubular reactors," Braz.J.Chem.Eng., 19, 89-103 (2002). [ Links ]


    23. Theodorou, D.N., "Hierarchical modelling of polymeric materials," Chem. Eng. Sci., 62, 5697-5714 (2007). [ Links ]


    24. Vega, M.P., E.L. Lima and J.C. Pinto, "Modeling and Control of Tubular Solution Polymerization Reactors," Comp. Chem. Eng, 25, S1049-S1054 (1997). [ Links ]


    25. Vega, M.P., E.L. Lima and J.C. Pinto, "In-Line monitoring of weight average molecular in solution polymerizations using intrinsic viscosity measurements," Polymer, 42, 3909-3914 (2001). [ Links ]


    26. Vianna Jr., A.S., E.C. Biscaia Jr. and J.C. Pinto, "Flutuações estocásticas para a DTR de um Reator Tubular de Polimerização," Polímeros: Ciência e Tecnologia, 16, 19-25 (2006). [ Links ]


    27. Vianna Jr., A.S., E.C. Biscaia Jr. and J.C. Pinto, "A Stochastic Flow Model for a Tubular Solution Polymerization Reactor. Polymer Engineering and Science," Polym. Eng. Sci., 47, 1839-1846 (2007). [ Links ]


    28. Vieira, R.C. and E.C. Biscaia Jr., "Direct methods for consistent initialization of DAE systems," Comp. and Chemical Engineering, 25, 1299-1311 (2001). [ Links ]


    29. Villadsen, J. and M.L. Michelsen, Solution of Differential Equation Models by Polynomial Approximation, Prentice-Hall, New York (1978). [ Links ]


    30. Yoon W.J. and K.Y. Choi, "Polymerization of styrene in a continuous filled tubular reactor," Polym. Chem. Eng., 36, 65-77 (1996). [ Links ]